Here is what Hydro Engineering has to offer you in an Injection Tool Bar.
- Wide bar space allows trash movement.
- 2,000 gallons per acre and up applications
- 22", 30", 36" shank spacing and other dimensions as needed.
- 12', 16', 20', 23', 30', 34' 3 Point toolbars and 46' Pull type toolbar available.
- Each injector can be metered by the Hydro Equalizer Manifold System.
|
 |
 |
Save Money on the Injection Unit ! Use Hydro's Patented three- point manifold system that will easily hook up to your AerWay unit, minimum till cultivator or chisel plow to make that tool your injection unit.
|
 |
Hydro Quick Hitch hooked to the AerWay toolbar for applying manure to grasslands or alfalfa fields.Hooded Spray Pans direct the manure straight down in front of the AerWay Shattertines and away from the bearings. |
| |
| Hydro's Bourgault Coulter Injector comes in a 27' three point or two point injection tool bar with wheels + wings and 26 rolling Bourgault coulters. This unit is great for no- till to tilled fields. Each coulter is equipped with a six bolt hub and two heavy - duty tension springs placing over 1000 LBS of trip force to the coulter. |
 |
| |
 |
Hydro Trash Handler Three Bar Injector has 26 Injectors with two Equalizer Manifolds. This tool bar is designed to go into fields with a high amount of trash residue.
All of Hydros tool bars are custom built for the customers application needs.
|
| The Hydro 34 Ft Pull Type Injector Double Toolbar with fold up wings and 17 Shanks at 24” spacing. A 200 HP Front Wheel Assist Tractor with dual wheels will be needed to pull this toolbar. |
 |
|
|
The 46' pull type toolbar can be ordered with standard 12" sweep injectors or minimum-till injectors. (pictured are minimum-till injectors on left 12" on right).
|
Double fold toolbar for easy transport behind tractor. (optional toolbar carrier available for long distance hauling)
|
Hydro's 46' pull type tolbar lets you achieve 2000 gallons per acre.
|
Folding 36 Ft Spray Bar allows surface application of water or manure on to the fields. |
|
Options for Hydro's Tool Bars
|
|
Options shown on this tool bar are
Double Swivel And Jag Swivel,
Isolator With Psi Gauge,
Fold Up Swing Tube,
Krone Flowmeter,
Stainless Steel Shutoff Valves
For shutting off when turning around at the end of the field and directing foam pig with the Hydro Pig Shooter.
|
 |
 Flow meter with remote digital readout in tractor cab gives the operator instant reading of gallons per minute and total gallons pumped for accurate application rates per acre. Flow meters are available in 4" - 6" or 8" from Krohne or Yamatake. |
|
|
 Meter Swing Tube Cover
protects the flow tube head from getting bent or damaged and will keep water from getting into the wiring compartment .
|
Hydraulic Shut-Off Valve allows the operator to shut flow off, while raising tool bar to turn around at the end of the field. Excess pressure is relieved automatically at the pump with Hydro's Engine Slow Down Package. |
 |
| |
|
The Patented JAG Swivel will allow the drag hose to untwist without unhooking from swing tube, while automatically removing twists. The JAG Swivel hooks up to all Shug Grip Pull Couplers. Adjustable linkage assures that the hose will not unhook from the Jag Swivel.
|
|
Double Swivel enables you to turn around at the end of the field without backing up. The double swivel works great for any pull type injection tool bar.
|
|
Equalizer Manifold delivers even amounts of manure to each injector for drag hose systems or manure tank wagons. Each manifold can handle 18 - 2" outlets , 17 - 2 1/2" outlets or 12 - 3" outlets. Flows from 200 GPM to 2000 GPM can be distributed perfectly. The replaceable cutting edge keeps plugging to a minimum. Note: Some large injection tool bars will need 2 manifolds. Patent Pending.
|
|
Swing Tube Pig Shooter allows the operator to shoot out the foam pig onto the ground instead of having to take it out of the manifold after cleaning of the hose. The shooter also works great at start up of the drag hose system to dump the first amount of dry mater onto the ground and not plug injectors.
|
| |
|
For More Information Please Contact Hydro Engineering Inc. 800-833-5812
|
